image
image
image
Emeraude v2.60 – Doc v2.60.01 - © KAPPA 1988-2010
Guided Interpretation #8 • B08 - 1/25
B08 – Guided Interpretation #8
This session illustrates the workflow offered by Emeraude for Multiple Probes Tools (MPT) around
a Flow Scan Imager™ (FSI) example.
The data is from a horizontal well logged with the FSI and PFCS tools. The flow is 3 phases and
two surveys were conducted: a shut-in and a flowing survey. The shut-in passes will be used to
calibrate the spinners. The flowing passes, after a data quality check, will be processed to obtain
average values that will serve as inputs for the PL interpretation.
B08.1 • Shut in Data Quality Control
We will start by opening the file called B08.ke2 which
contains the GWD info and the shut-in
passes corrected in depth.
Data quality control can be greatly facilitated by displaying the data in an appropriate way using
view templates.
A view template is a model that allows creating one or several views (user views, image views,
etc…) with predefined settings in a given order. The views resulting from a view template are
created (or displayed if already existing) when the template is invoked. It is not part of this
session to show how a view template can be created and we will use a set of predefined view
templates dedicated to the Schlumberger tools to generate the displays of interest.
B08.1.1 • Spinner Data Quality Control
Go to Settings – Default display – Templates tab.
Use the file open button
to load the template file called ‘SchlumbergerTemplates.kvt’
located in the Emr260 folder.
A new folder is added to the list of available templates, below the local templates folder. If you
open this folder, you will see several templates dedicated to a wide variety of SLB measurements.
The link with the SchlumbergerTemplates.kvt file will be saved with your Emeraude settings
(unless the file is deleted or renamed). Among the templates, we will use the full layout
templates.