image
image
Emeraude v2.60 – Doc v2.60.01 - © KAPPA 1988-2010
Guided Interpretation #5 • B05 - 1/32
B05 – Guided Interpretation #5
This example covers a deviated producer (74deg) logged with Multiple Probe Tools, two DEFT,
and stationary water velocity measurements. The well is producing from 4 sets of perfs,
through isolated, internal gravel pack screens. The PLT data does not cover the deepest set of
perfs. The following features are illustrated in this example:
Handling X-Y caliper data.
Image views.
Well views.
Working with Multiple Probe Tools.
Loading / processing of stationary measurements.
By-passing slippage correlation when enough information is provided.
The data for B05 is contained in several files:
B05_gwd.las: ‘General well data’; contains an open-hole gamma-ray and a deviation
survey,
B05d1.las, B05d2.las, B05u1.las, B05u2.las: flowing survey log data (except stations),
B05_sta_8071.las, B05_sta_8325.las, B05_sta_8578.las: stations with water velocity
(name indicates depth in ft),
B05.epv: PVT file.
B05.1 • Create B05 and load the general well data
Start Emeraude and create a new document with oilfield units. In the ‘Document’ panel,
select ‘Load Well Data’ and load the channels present in the file B05_gwd.las: open-hole
gamma ray and deviation survey. Only the gamma-ray is plotted by default.
The creation
of a well view will be illustrated later.
In ‘Document – Well Details’, Define the Perforations and Reservoir zones as given below
(note that a name can be given to them):
Perforations (ft)
8248 8314
8461 8530
8615 8734
9009 9068
Reservoir zones (ft)
8232 8317 A
8447 8535 B
8581 8737 C
8995 9074 D